Smd5050 IC2801 30leds 48leds RGB 12V Epistar Rigid Led Strip Pixel Led Rigid Bar Digital Color
Quick Details Light Source:LED Item Type:Light Strips LED Light Source:smd5050 Type:LED Bar Lights Input Voltage(V):12V Lamp Power:7.2W Lamp Luminous Flux(lm):R58/G162/B54 CRI (Ra>):85 Working Temperature(℃):-30 - 40 Working Lifetime(Hour):50000 Lamp Body Material:Copper Certification:CE,...
Item Type:Light Strips
LED Light Source:smd5050
Type:LED Bar Lights
Lamp Luminous Flux(lm):R58/G162/B54
Working Temperature(℃):-30 - 40
Lamp Body Material:Copper
Place of Origin:Guangdong, China (Mainland)
Packaging & Delivery
|Delivery Detail:||1-7 working days|
1,voltage 12V, Power 7.2W/M
2, IC LPD6803 & WS2801
1,There are two type of this bar string, one is controlled by IC LPD6803, a LPD6803 control 3leds.Another one is controlled by WS2801, a ws2801 control 1 led.
2, Each LED bar is made by Aluminum for heat dissipation to ensure an efficient,long life and bright LED.
3, Each Led bar is supplied with an input and output cable. The input cable can be connected to a 12V power supply or another led bar, the output cable can connect with another led bar or remove to end the circuit.
4,Additional extension cables can be plugged into the circuit for installations that require longer cabling between components of the circuit.
|LED Type/brand||SMD5050 Grade A(top qualilty)|
LED Power Consumption
|12 V DC|
|Average life||50,000 hours|
This rigid LED Strip light can be used around the home as under cabinet kitchen lighting, cove lighting, shelf lighting and around home media systems. It's also ideal for display cabinets in shops/museums as it's easily concealed, uses little energy, creates little heat and can be installed quickly and easily.
1.Compatible 12V power supply
An LED 12 Volt Driver is required to power the LED rigid bars. They are available to buy with the LED bar on this page or can be purchased separately in our LED driver department where we also sell waterproof drivers. Each metre of LED rigid bar requires 14.4 watts of power so choose a driver powerful enough to supply the total watts required.
1) Signal wire: DC+,GND,DAT,CLK
2) DC+ and GND connect to power supply;DAT and CLK connect to controller
3) Relative Controller: SPI controller support LPD6803; when use DMX decorder, can connect to DMX system
4) Support online control
Each light bar is supplied with 2 metal clips - screw the clips to a surface then push the light bar into the clips to secure.
4.CE and ROHS approved to comply with Europe safety regulations.